Skip to main content
Genuine Oregon Mower Blade, 19-5/8"""""""" rpls BRIGGS 042785E701 97-016

Genuine Oregon Mower Blade, 19-5/8"""""""" rpls BRIGGS 042785E701 97-016

Oregon

MSRP: $14.75
$9.22
(You save $5.53 )
(No reviews yet) Write a Review
SKU:
OEP~97-016
UPC:
032488970162

Details

  • Center hole: 3/8"
  • Requires 1 blade for a 20" cut
  • low-lift
  • Superior mulching for bagging and discharge efficiency
  • Enhanced hardening to keep the blade sharper and more durable
  • Replaces major brand: Murray

Blades

Blade Width Measure near the center of the blade.2.25"
Blade Thickness Measure near the center of the blade.0.134"
Blade Length Measured diagonally from the corners of the blade19-5/8"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut3/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table3/8"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.11/16"

General

ColorBlack
Volume248.509 in3
Product UOMEach
Weight (with Packaging)1.668 Lb
Product Height0.134
Product Length19-5/8"
Product Width2.25
Packaged Length23.6"
Packaged Width3.9"
Packaged Height2.7"

Click these tabs for additional compatibility information.

Replaces

Murray:

042785E701, 042785E701MA, 042785E701WMA, 20045E701, 2045HT, 420045, 42785E701, 42785E701MA, 42785HT, 442785, 442785MA, 5548MA, 642785, 642785E701, 774004

Rotary:

2012

Stens:

335-760

Sunbelt:

B1SB2012

Compatible Models

Murray:

201010x30B, 201010x30NA, 201010x31A, 201010x83NA, 201010x99NA, 201011x83A, 201011x99A, 201011x99B, 20101A, 20101B, 20101C, 20101x18A, 20101x192A, 20101x194C, 20101x31A, 20101x31B, 20101x31C, 20101x31D, 20101x31NA, 20101x32A, 20101x78A, 20101x78B, 20101x83A, 20101x83B, 20101x92A, 20102x92A, 20102x92B, 20102x94A, 201030x00A, 201030x192A, 201030x199A, 201030x24A, 201030x30A, 201030x78A, 201030x78B, 201030x78C, 20103x199A, 20103x25A, 20103x25B, 20103x30A, 20103x30B, 20103x31A, 20103x34A, 20103x34B, 20103x34C, 20103x35A, 20103x35B, 20103x4A, 20103x99A, 20104A, 20104B, 20104D, 20104F, 20104G, 20104x199A, 20104x99A, 20104x99B, 20111x14A, 20111x14B, 20111x194A, 20111x194B, 20111x194C, 20111x194D, 20111x194E, 20111x194NB, 20111x592A, 20111x78A, 20111x78B, 20111x78C, 20111x78D, 20111x78NA, 20111x92B, 20111x92C, 20111x92D, 20111x92NA, 20111x94A, 20112x194A, 20112x92A, 20112x92C, 20112x92NA, 20114A, 20121A, 202010x18A, 202010x24A, 202010x92A, 20211x5E, 20213x199A, 20214x34A, 20221Ax92A, 20221Ax92B, 20221Bx92A, 20221Bx92B, 20221x19A, 20221x50A, 20221x50B, 20221x51A, 20221x51B
!